|
Handy Guide to Parts and Accessories
By no means complete or comprehensive, this guide is to help people compare and provide parts numbers for commonly asked parts. Part numbers may change or be superceded by newer products. Always double check the part numbers to insure you receive the correct part for your application.
|
Anti-Sway Bars and Springs
Addco:
Anti-Sway Bars:
High carbon steel, hardened and stress relieved with forged ends.
Front 1" dia, gold cad: part # ACO-02072G
Rear 3/4" dia, gold cad: part # ACO-02077G
Apex Suspension Systems:
Spring Sets:
F/R drop, 35mm/35mm: part # 340-3000
B+G Sport Suspensions:
Spring Sets:
F/R drop, 1.25"/1.25": part # 14.1.009
Bilstein:
PSS Coil Over:
F/R drop: up to 70/50mm: part # HE5-8718
BTG:
Spring Sets:
F/R drop, 1-3/4"/1-1/2": part # PT1016BTG
Coil Over: F/R drop, 1.5-2.5"/1.0-2.0": part # PT1014BTG
Doetsch Systems:
Coil Over: F/R drop, unknown: part # S1-D0031
Shocks are completely rebuildable and re-valvable. Call Doetsch Enterprise for coil over specs or to specify desired spring and shock rates.
DropZone Springs:
Spring Sets:
F/R drop, 2"/2": part # DZ-SP5006
Eibach:
Anti-Sway Bars:
Cold-formed, high-strength aircraft-grade steel
Front, 25mm dia and Rear, 22mm dia (sold as a set):
part # 2860.320
Note: If your PT did not originally come with a rear sway bar, you will need to buy the rear installation kit: part # 2860.320HKR. This rear installation kit will also work with other anti-sway bars. The alternative would be to purchase all the related parts from the dealer. The cost is about the same, but the Eibach kit includes a clip (2) to hold the nut(s) in the axle, thus making the installation easier.
Spring Sets:
F/R drop, 1.6"/2.0": part # 2860.140
Coil Over: F/R drop, 1.2-3.0"/0.8-2.0": part # 2860.710
Alignment Kit (Camber), Front:
part # 5.81260K: 1.75° +/- adjustment range
Energy Suspension:
HYPER-FLEX SYSTEM Complete Master Bushing Set:
part # 5.18108**
Includes: Front control arm bushings, front and rear sway bar bushings, front end links, rear traling arm bushings, rear coil spring isolators, rear watts link bushings, rear bump stop set.
Front End Control Arm Bushing Set: part # 5.3129**
Front Sway Bar Frame Bushings, 24mm: part # 5.5153
Front Sway Bar End Link Set: part # 5.8105
Rear Sway Bar Frame Bushings, 16mm: part # 5.5152**
Rear Watts Link Bushing Set: part # 5.8106
Rear Coil Spring Isolators: part # 5.6110
Rear Bump Stop Set: Part # 5.6107**
Rear Trailing Arm Bushing Set: part # 5.7113**
Lower Transmission Torque Mount Set: part # 5.1105
**NOTE: Must reuse all metal parts.
Euro Blue-Line:
Spring Sets:
F/R drop, 44mm/44mm: part # PTZX2001
GoldLine Springs:
Spring Sets:
F/R drop, 1.50"/2.00": part # GPS0300
F/R drop, 2.75"/3.25": part # GL0301
Ground Force:
Spring Sets:
F/R drop, 2.00"/2.00": part # 2020
Rear only, 1.50" drop: part # 1083
Hellwig:
Anti-Sway Bars:
Hot formed and heat treated 4140 chrome moly spring steel
Front, 1" dia: part # 7656
Rear, 3/4" dia: part # 7657
H&R:
Anti-Sway Bars:
50CrV4 spring steel, shot peened and heat treated with forged ends. Bushings are made of Urethane/Teflon composite to eliminate the need for lubrication.
Front, 25mm dia: part # 70800
Rear, 20mm dia (adjustable): part # 71800
Spring Sets:
F/R drop, 1.4"/1.3": part # 50800
Cup Kit: F/R drop, 2.0"/1.7": part # 31029-1
Coil Over: F/R drop, 1.25-2.5"/1.0-2.0": part # 29371-1
"Tripple C" Camber Adjustment Bolts, Front:
part # TC114: 3° +/- adjustment range
Ingalls Engineering:
Camber Adjustment Bolts:
part # 35420: 1° +/- adjustment range
part # 81260: 2° +/- adjustment range
|
InTrax Suspension Technology:
Anti Sway Bars:
Front, 25mm dia and Rear, 19mm dia (sold as a set).
part # 28.7.009
Spring Sets:
F/R drop, 1.8"/1.8": part # 28.1.009
F/R drop, 2.0"/2.0": part # 28.2.009, super sport series
Note: All InTrax parts are purple powder coated.
Koni:
SSK Suspension Kit:
F/R drop, 30/35mm: part # SSK146
Note: Koni SSK kit comes with four adjustable (yellow)
Sport shocks (many with top adjustable facilty),
lowering springs and Powerflex bumpstops.
KW Suspensions:
Stainless steel Inox strut housings for the ultimate in corrosion resistance and longevity.
Coil Over (Variant 1, KW Factory Set Dampening):
F/R drop, 40-70mm/30-50mm: part # 10027002
Mopar:
Anti-Sway Bars:
Front, 22mm dia and Rear, 19mm dia (sold as a set).
part # 5007436
Stage 1 Anti-Sway Bars:
Non-Turbo: part # 4510261, F/R set*
Turbo: part # 4510455, F/R set*
* Mopar Performance Catalog says "Front Only", but buyers have reported it is a F/R set.
Spring Set:
Front drop, 1": part # 5007395, front strut and spring pkg.
(One side only. Need to purchase 2).
Rear drop, 1": part # 5007396, rear shock and spring pkg. (One side only. Need to purchase 2).
Stage 1 Springs:
F/R drop, 25mm/25mm:
Non-Turbo: part # 4510459, F/R set
Turbo: part # 4510262, F/R set
Stage 2: Coil Over
(same as KW Variant 1 except for height adjustments)
F/R drop, 0-30mm
Non-Turbo: part # P4510448
Turbo: part # P4510449
Stage 3: Coil Over
(Rebound Adjustable from 20% under to 50% over Stage 2 settings)
F/R drop, 0-30mm
Non-Turbo: part # 4510629
Turbo: part # 4510628
PI Suspension:
Spring Sets:
F/R Drop, 35mm/35mm: part # 06-017
Progress Technology:
Anti-Sway Bars:
Front, 27mm dia: part # 61.0610
Rear, 19mm dia: part # 62.0610
Note: Specifications are taken from the Progress Technology Catalog, but some PT sites report the rear bar is 22mm dia. It is unknown at this time if a change was made.
Spring Sets:
F/R drop, 2.0"/2.3": part # 40.0610
Camber Adjustment Kit, Front: part # 53.0610
Spax Suspension:
Spring Sets:
F/R drop, 30mm/35mm: part # S004004
F/R drop, 50mm/55mm: part # S004005
Sprint Performance Suspension:
Spring Sets:
Non-Turbo: F/R drop, 2.0"/2.0": part # 5006
Turbo: F/R drop, 1.75"/1.75": part # 5050
Convertible: F/R drop, 1.75"/1.75": part # 5065
Camber Alignment Kit, Front:
part # 81260F: 1.75° +/- adjustment range
Suspension Technique:
Anti-Sway Bars:
Front, 1 1/8" dia: part # 50006
Rear, 7/8" dia: part # 51006
F/R set: part # 52006
Spring Sets:
F/R drop, 1.3"/1.3": Part # 60006
Tein:
Spring Sets:
F/R drop, 33mm/50mm: Part # SKG10-AUB00
Spring Rates F/R: 180 Ibs-in/160 Ibs-in
CoilOvers:
F/R Part # DSG10-KUAS2
F/R drop, 40mm-66mm/24mm-62mm
Spring rates F/R: 280 Ibs-in (part #SB050-01200)/220 Ibs-in (part #S6G11-0U040)
Vogtland:
Spring Sets:
F/R drop, 35mm/35mm: part # 950307
Coil Over: F/R drop, 40-70mm/30-50mm: part # 968470
Weitec Springs:
Spring Sets:
F/R drop, 30mm/35mm: part # CR001F
F/R drop, 30mm/55mm: part # CR013F
F/R drop, 50mm/35mm: part # CR005F
F/R drop, 50mm/55mm: part # CR003F
Coil Over: F/R drop, 30-60mm/30-50mm: part # CR901GT
|
|
|
Tower Strut Bars
|
Shocks and Struts
|
BTG:
Polished Aluminum
Non-Turbo - PT1080BTG
Turbo - PT1081BTG
Freedom Design:
Polished Stainless Steel - chrome plated versions also available
Non-Turbo - PT67204
Turbo - PT67205
Race and Street:
Chrome Moly - Yellow and Black color choices
Non-Turbo - part# unavailable
|
AC Delco Premium Gas:
Front Strut: part # 503389
Rear: part # 530328
Bilstein:
Heavy Duty:
Front Strut: part # VE3-A780-H0
Rear: part # BE3-A781-H0
Sports:
Front Strut: part # VE3-A782-H0
Rear: part # BE3-A783-H0
BTG GT Sport Shocks:
F/R set: part # PT1015BTG
Gabriel Ultra Gas Shocks:
Front Strut: part # G55892
Rear: part # 69473
Koni Sport Adjustable:
Front: part # 8641 1417Sport*
Rear: part # 8040 1282Sport
*Note: Special McPherson strut insert bolted into O.E. housing after cutting top and removing old internal parts.
|
KYB Gas Shocks:
Front Strut: part # 235626, GR2
Rear: part # KG4551, Gas-A-Just
Monroe Sensa-Trac®:
Front Strut: part # 71592
Rear: part # 5989
Sachs Super Gas:
Front Strut: part # 030 699
Rear: part # 030 814
Tokico Gas Shocks:
Front Strut: part # HB3195
Rear: part # HE2950
|
|
Oil Filters
Below is a listing by manufacturer. The 2nd filter number listed (and/or followed by **) will be the longer and larger capacity filter, usually used in the GT or Turbo PT's but can be used in the regular PT's. As always, double check the part numbers if you have access to an oil filter catalog. Part number changes happen quite frequently or get outdated.
AC Delco
PF53
PFL400A**
Amsoil
SDF57
SDF34**
Casite
CF-3614
CF-213** or CS113**
Fram
ExtraGuard -
PH3614
PH3600**
ToughGuard -
TG3614
TG3600**
DoubleGuard -
DG3614
DG3600**
X2 -
XG3614
XG3600**
Hasting
LF157
LF135**
|
K&N
HP-1002
HP-2009**
Lee
LF2835
LF400**
Meijer
M22
Mobil 1
M1-102
M1-209**
Motorcraft
FL793
FL13A** or FL-400A**
Pennsoil
PZ21
PZ19**
Pronto
PO3614
PO3600**
Purolator
L10241
L20195**
|
Purolator Pure One
PL10241
PL20195**
STP
STPS3600**
TruFilter Oil Systems
TUD560
TUD738**
See Ultra Filter notes and warning below. It appears to be the same filter
UltraFilter
ULT560
ULT738**
Note: UltraFilter media are re-usable and cleanable. Filter media is T304 stainless steel 35 micron screen cloth and the exterior and end cap is made of 6061T6 Billet aluminum.
Warning: Typical or traditional oil filters trap particles between 6 and 20 microns. Re-usable filters only trap 35 micron or larger particles. So use re-usable and cleanable oil filters at your own risk.
Valvoline
VO25
VO23**
Wix
51348
51516**
|
|
|
|
Air Filters
|
Drop-In or Direct Replacement Air Filters
|
Accel Kool Blue
Cotton Gauze - reusable
KP2539
AFE
Cotton Gauze - reusable
30-10096
AIRAID
Cotton Gauze - reusable
AA850-153
Amsoil
Foam - reusable
AF1101
|
Fram
CA8747
Green Filter
Woven Cotton - reusable
2033
2338 - turbo
K&N
Cotton Gauze - reusable
KN33-2153
Mopar
M4891176AA
P4510476 - reusable
|
Purolator
A25372
True Flow
Foam - reusable
35201
Wix
46699
|
|
|
FIPK or Cold Air Intake Systems
|
AEM
Turbo - 22-427
AFE
Non-Turbo - 54-10352
AirAid
Non-Turbo - AR-300-120
Turbo - AR-300-138
Airforce One
Non-Turbo - AFO-16801
Turbo - AFO-16800
Turbo Drop-in Kit - AFO-16803
Air Max
Non-Turbo - 001-331 or 32400 (2001-02)
Non-Turbo - 001-337 or 32405 (2003-04)
Turbo - 001-336 or 32450
Note: catalog part #'s vary, so both are listed
APC
Non-Turbo Intimidator Intake - 151020K
BTG
Non-Turbo - PT1025BTG
Turbo - PT1027BTG
Turbo (uses lower stock box) - PTZX2005
|
Injen
Non-Turbo (black) - IS5050BLK
Non-Turbo (polished) - IS5050P
Note: red and blue available by special order.
Keystone
Non-Turbo - GH-PTBX
Turbo - GH-PTBTR
K&N
Non-Turbo - KN-57-1515-1
Turbo - KN-57-1531
Non-Turbo Typhoon - KN-69-2541TB, KN-69-2541TP,
KN-69-2541TR, or KN-69-2541TS
Turbo Typhoon - KN-69-2541TR, KN-69-2541TP,
KN-69-2541TR, or KN-69-2541TS
Note: Typhoon multiple part numbers reflect different color finishes.
PiperCross
Non-Turbo Induction kit - PK176
Non-Turbo Viper induction kit - VF176 (Sealed carbon fibre induction kit)
Turbo Models under development.
Volant
Non-Turbo - VOL-13424
|
|
Ignition - Coil, Spark Plugs, and Spark Plug Wires
Note: There are other spark plugs, like the Denso PT16VR13 or Iridium ITV16, but those spark plugs require a specially machined socket and custom spark plug wire sets to install/remove and work properly. In other words, the spark plugs were not designed for use in the PT or 2.4L engine. Lose or crack the special spark plug socket and you will not be able to remove the spark plug. Also, platinum spark plugs are NOT recommended for use in turbo engines.
|
Bosch
Platinum +2 - 4314
Platinum +4 - 4482
Note: There have been some reports that the length of the plug into the combistion chamber is shorter than OEM plugs. Also the plugs cannot be gapped.
Champion
Copper - stock # 440 - RE14MCC5 (OEM)
Copper - stock # 470 - RE14MCC5 (supercedes/replaces # 440, but some catalogs list same part #)
Copper - RE16MC (supercedes/replaces RE14MCC5 and new Chrysler recommended gap is .040)
Single Platinum - stock # 3032 (one range colder)
Double Platinum - stock # 7440 - RE14PLP5
Double Platinum - stock # 7570 (supercedes/replaces # 7440)
Double Platinum - stock # 7032 (one range colder)
Iridium - Stock # 9403 (0.7mm iridium center electrode and platinum tipped V shaped ground electrode)
Note: There is a stock # 3570 listed as marine/truck premium plug, but no further information is available.
NGK
Copper - LZTR4A-11 (supercedes/replaces RE14MCC5 and new Chrysler recommended gap is .040)
Copper - stock # 4306 - LZTR5A-13 (is also listed for turbo engine, one range colder)
Copper - stock # 5306 - LZTR4A-11 (listed for non-turbo 2005+ PT, same heat range as OEM spark plugs)
Platinum - stock # 3381 - LZTR5AGP (listed for turbo 2005+ PT, one range colder)
Platinum - stock # 5017 - LZTR4AGP (listed for non-turbo 2005+ PT, same heat range as OEM spark plugs)
Double Platinum - stock # 4998 - PLZTR5A-13 (listed for all models 2001-2004 and turbo 2005+, one range colder)
Double Platinum - stock # 4997 - PLZTR4A-13 (listed for non-turbo 2005+ PT, same heat range as OEM spark plugs)
Iridium IX - stock # 2314 - LZTR5AIX-13 (is also listed for turbo engine, one range colder)
Iridium IX - stock # 2313 - LZTR4AIX-11 (listed for non-turbo 2005+ PT, same heat range as OEM spark plugs)
Denso
Iridium - stock # 5349 - ITL16 (listed for both turbo and non-turbo)
Iridium - stock # 5350 - ITL 20 (not officially listed for the PT, one range colder)
|
Accel 300plus ThunderSport™
7971B,R,Y - 8mm (B,R,Y = color choices)
Note: no longer listed in Accel catalog and may have been discontinued. The 7971 wires can still be found at the larger performance retailers like Summit.
7961B,R,Y - 8mm are being sold by vendors, but are not PT specific.
Bosch
09477 - 7mm, OEM Replacement Wires
Crane FireWire
255-4040 - 8.5mm - black
JBA
Power Cables: 0937 - 8mm red
Kingsborne
18-724 - 7mm, 8mm, and 9mm. 5 colors available.
Note: Company, logo, or club name can be imprinted on the wire and/or packaging.
Magnecor
Electrosports 70:
Non-Turbo: MAG47428 - 7mm black
Turbo: MAG47321 - 7mm black**
Electrosports 80:
Non-turbo: MAG40428 - 8mm blue
Turbo: MAG40231 - 8mm blue**
KV85 Competition:
Non-Turbo: MAG45428 - 8.5mm red
Turbo: MAG45231 - 8.5mm red**
R-100 Racing:
All Models: MAG49428 - 10mm red
**Note: Either set will fit any PT. The turbo specific wires have angled boots at the coil to help "lift" the wires away from heat sources or contact with the valve cover. Can also use wire separators to maintain or insure cooling/clearances.
Mopar
P4876511 - 7.5mm Performance Wires
P5249718 - Spark Plug Wire Removal Tool
|
Moroso Blue Max™*
72704 - 8mm black
72705 - 8mm red
72706 - 8mm yellow
Note: Read the *Note section below.
MSD Ignitions*
32279 - 8.5mm red
32273 - 8.5mm black
Note: part #'s are from vendors and PT owners. Read the *Note section below.
Nology
Hot Wires: 011-124-001
Note: Change last digit in part # for wire color: 1=Red, 2=Black, 3=Orange, 4=Yellow, 6= Blue, 7=Purple, 8=Silver. May also be required to purchase (2) PowerCore ignition coil amplifiers, part # PC-10, in order to generate enough spark and to charge up the capacitors in the wires. Each wire has a ground wire. Make sure you have a good grounding point or the resulting RFI/EMI emissions may affect your pcm/vehicle electronics.
OBX Racing Sports
High Power Competition: ASW502 - 10.3mm
Available in Red, Blue, and Yellow
Performance Distributors
LiveWires:
PDC9083RD - red
PDC9083BU - blue
PDC9083PL - purple
PDC9083BK - black
PDC9083YL - yellow
Prestolite
F1020-129677 - OEM replacement wires
Taylor Vertex
8mm Spiral Pro: 72X27
Replace the "X" in the part # for wire color choice (0=black, 2=red, 6=blue)
ViTek
Magstar Wires:
12-4040 - 7mm, OEM Replacement Wires
Ultra Series Braided Wire:
23-U4040 - 10mm
Available in Red , Yellow, Blue, Green, Purple, White, Black, or Silver.
|
*Note: Moroso and MSD Spark Plug wire sets are listed because they are being sold by popular PT vendors and PT owners are generally satisfied with the fit and performance. However, there are no actual PT specific spark plug wire applications listed in either the Moroso or MSD catalogs. Proper spark plug well sealing from dirt and moisture may be in question. Conversely, the Mopar performance wires lists the same applications as well as the PT, so one could infer that the Accel (7961B,R,Y), Moroso, and MSD spark plug wire sets should fit and seal properly.
|
Ignition Coil
|
Performance Clutches
|
Short Throw Shifters
|
AC Delco
C521
MSD Ignitions
8239
Performance Distributors
Screamin' Demon Coil
31732
|
ACT
Contact ACT for the latest/correct part numbers:
http://www.advancedclutch.com/
Non-Turbo:
HD pressure plate with organic disk: part # DN2-HDSS
HD pressure plate with 4-puck rigid disk: part # DN2-HDR4
HD pressure plate with 6-puck rigid disk: part # DN2-HDR6
Turbo:
HD pressure plate with organic disk: part # DN3-HDSS
HD pressure plate with 4-puck rigid disk: part # DN3-HDR4
HD pressure plate with 6-puck rigid disk: part # DN3-HDR6
Xtreme pressure plate with 4-puck rigid disk: part # DN2-XTR4
Xtreme pressure plate with 6-puck rigid disk: part # DN2-XTR6
*Must use ACT Flywheel with all the above applications. All pressure plates have 50+% more clamping force than stock.
ACT Flywheel:
Non-Turbo: part # 600335
Turbo: part # 600345
Centerforce
DFX Series, Non-Turbo:
01325417
4-6 Puc Solid Disc *street/strip to full-on drag racing capability
Dual Friction, Non-Turbo:
DF325450
Note: early clutches did not come with flywheel. Check before ordering since the part numbers are the same. Also some sites will list this for the 2003 PT Turbo, which may be a mistake
Dual Friction, Turbo:
DF340340 (Size 9.4375 in.; Spline 1.125 in. x 26 in.}
Dual Friction with Flywheel, Non-Turbo: DF325450 (Size 9 in.; Spline 0.9375 in. x 17 in.}
SPEC *
Non-Turbo
Stage I- High clamp pressure plate with organic disk:
SD581
Stage II- High clamp pressure plate with kevlar disk:
SD582
Stage III- High-clamp pressure plate with race disk:
SD583
Stage IV- High-clamp pressure plate with 2-piece rigid disk:
SD584
Stage V- High-clamp pressure plate with iron disk:
SD585
Turbo:
Stage I: SD851-2
Stage II: SD852-2
Stage II+: SD853H-2
Stage III: SD853-2
Stage III+: SD853F-2
Stage IV: SD854-2
Stage V: SD855-2
*All SPEC Chrysler PT Cruiser racing clutch kits come with pressure plate, clutch disc, and release bearing. Steel and Aluminium flywheels are available. Lightweight Option (pressure plate outer shell or clamping plate is drilled) or Aluminium pressure plate can be added to any clutch. Catalog indicates PT turbo models are included in the above applications.
Unorthodox Racing Ultra G Kevlar Clutch Kits
Full Face Kevlar w/ Rigid Hub:
Part #: 070100300
Windowed Kevlar w/ Rigid Hub:
Part #: 070100301
Full Face Kevlar w/ Sprung Hub:
Part #: 070100310
Windowed Kevlar w/ Sprung Hub:
Part #: 070100311
|
B&M Short Shifter:
BM-45105 (can be used in turbo)
Hurst Short Shifter:
391 4030 (non-turbo)
Mopar Performance:
P4510486 2003–04 PT Turbo Hurst Short Shifter
(exclusive to Mopar Performance)
P4510263 2001–04 PT Cruiser (non-turbo) Hurst Throw Shifter
(same as Hurst Short Shifter listed above)
OBX Racing Sports:
SS9405 (Available in: R=Red, B=Blue or S=Silver. Add color code at end of part#)
Pacesetter:
01-0710 (Fully adjustable, up to 80% shorter throw)
|
|
Lamps and Lighting
Backup Light - 3157-P27/7W
3rd Brake Light - W16W
Front Fog Lamp - 9006
Parking/Turn Signal/Side Marker - 4157NAKX
Parking/Turn Signal/Side Marker (export) - 3757A-PY27/7W
Headlamp Low Beam - 9006SX
Headlamp Low Beam (export) - H7
Headlamp High Beam - 9005SX
License Plate lamp - 168
Tail Lamp - 3157-P27/7W
Front Position Lamp (export) - W5W
Side Repeater Lamp (export) - W5W
|
ABS Indicator - LED
Air Bag Indicator - LED
Brake Warning Indicator - LED
Climate Controls - 6233137
Console Flood Lamp - T37
Console Transmission (PRNDL) - T194
Dome Lamp - T579
Dome Lamp with Intrusion Sensor (export) - T578
Door Ajar Indicator – VFD*
Front Fog Light Indicator - LED
High Beam Indicator - PC74
Instrument Cluster Illumination - PC74
Liftgate Ajar Indicator – LED
Low Fuel Indicator - LED
Low Oil Pressure Indicator - LED
Malfunction Indicator Light - LED
Map/Reading Lamp - T1037
Overhead Reading Light (Rearview Mirror) – T192
Rear Cargo Lamp - T904
Seat Belt Indicator - LED
Security Alarm Indicator- LED
Temperature Indicator – LED
Trac (Active) Indicator – VFD*
Trac Off Indicator - LED
Trip Indicator VFD*
Turn Signal Indicator - T74 (2001 PT - 103)
Visor Vanity - 6501966
Voltage Indicator - LED
Note: *VFD = Vacuum Fluorescent Display
|
Fuse Chart for the 2001 PT Cruiser
Fuse
Chart for PT Cruiser.
Fuse
Number |
Amp/Color |
Items Used |
1 |
30 Amp/Pink |
Ignition Start |
2 |
40 Amp/Green |
Anti-Lock (ABS) Pump |
3 |
40 Amp/Green |
Ignition Run |
4 |
Spare |
|
5 |
40 Amp/Green |
Radiator Fan |
6 |
20 Amp/Blue |
Power Height Adjuster |
7 |
20 Amp/Blue |
Anti-Lock Brake (ABS) Solenoid |
8 |
40 Amp/Green |
Electric Back Light (ELB) |
9 |
Spare |
|
10 |
40 Amp/Green |
Exterior Lighting, Remote
Keyless Entry, Alarm & Door Locks |
11 |
10 Amp/Red |
Air Conditioner (A/C) |
12
|
15 Amp/ Lt. Blue |
Stop Lights |
13 |
20 Amp/Yellow |
Fuel Pump/Auto Shut Down
(ASD) |
14 |
15 Amp/Lt. Blue |
Horn |
15 |
20 Amp/Yellow |
Electronic Transaxle (ETAX) |
16 |
Spare |
|
17 |
15 Amp/Lt. Blue |
Ignition Off Draw (IOD) |
18
|
15 Amp/Lt. Blue |
Hazard |
19 |
20 Amp |
Power Outlets |
20 |
Spare |
|
21 |
20 Amp/Yellow |
Fog Lights (Build Up Export
Only) |
22 |
Spare |
|
|
Brake Components
Akebono
ProACT Ceramic Pads (Front Only) - part # ACT841
Baer
DecelaRotors - Slotted and Drilled Rotors(set):
2001-2003:
Front: Part #: 53000-020
Rear: Part #: 5375-020
2004-2005:
Front: Part #: 53009-020
Rear: Part #: 53008-020
Brembo
Direct replacement rotors (plain) are available, but part numbers are unknown at this time.
DBA Rotors
Standard, Slotted, and Gold Series (drilled & slotted):
Specify choice when ordering.
Front - part # 167
Rear - part # 166
Edelbrock
Stainless steel brake line kits
Part # 694010 - 2001+ PT Cruiser 4 Wheel Disc & ABS (includes turbo model)
Part # 694020 - 2001+ PT Cruiser (Rear drum)
EBC
Green Stuff Brake Pads, Kevlar content formulation:
Note: same part number is listed for both N/A and Turbo PT's
Front - part # DP21357
Rear - part # DP21066
Sport Rotors (Dimple Drilled & Slotted):
Non-Turbo:
Front - part # GD993
Rear - part # GD998
Turbo:
Front - part # GD7112
Rear - part # GD7142
Hawk Performance
Brake Pads, front - part # HB377.760
Brake Pads, rear - part # HB176.614
Front, HPS Brake Pads: part # HB377F-760
Front, Blue 9012 Racing Pads: part # HB377E-760
Front, HT10 Racing Pads: part # HB377S-760
Front, HT14 Racing Pads: part # HB377V-760
Front, Ceramic Pads: part # HB377Z-760
Rear, Ceramic Pads: part # HB176Z-614
Rear, HP Plus Pads: part # HB176N-614
Rear, HPS Pads: part # HB176F-614
KVR Performance:
Brake Pads, carbon fiber, front: part # M7716
Brake Pads, carbon fiber, rear: part # M7717
Rotor, Front: part # 53230
Rotor, Rear: part # 53211
Steel Braided Brake Lines (4 line kit): part # 12502
Mintex
Brake Pads, Front: part # MDB2082D
Brake Pads, Rear: part # MDB1880D
Mopar
Brake Pads, OEM Front: part # V1013843AB
Brake Pads, OEM Rear: part # V2013208AB
Brake Shoes, OEM Rear: part # V2013209
Rotor, OEM Front: part # 4509994AA
Rotor, OEM Rear: part # 5085651AA
Drum, OEM Rear: part # 4509676
NAPA
Note: listed from highest to lowest MSRP.
Brake Pads:
Front, Ceramix: part # CMX7716
Front, AE Metallic: part # AE7716M
Front, Ceramix Safety Stop: part # SS7716X
Front, Metallic Tru-Stop: part # TS7716M
Rear, AE Metallic: part # AE7438DM
Rear, Metallic Tru-Stop: part # TS7438DM
Rear, turbo, AE Metallic: part # AE7650M
Rear, turbo, Metallic Safety Stop: part # SS7650M
Rear, turbo, Metallic Tru-Stop: part # TS7650M
Rear Brake Shoes (drum brakes): part # AE10759R
Rotors:
Front - part # 86955
Rear - part # 86551
Hi-Perf Rear Left - part # PR86551L
Hi-Perf Rear Right - part # PR86551R
Front, Tru-Stop Rotor (low cost): part # 4886955
Consult the Napa Catalog for additional parts.
Nitrac
Cryogenically treated. Various styles from 8, 12, and 16 grooves/slots per rotor, crossdrilled and slotted, and crossdrilled.
Visit MSW for additional info and photos or Nitrac
|
PowerSlot Rotors:
2000-2003 PT CRUISER (EXCEPT TURBO):
Front Left - part # 8762 PSL
Front Right - part # 8762 PSR
Rear Left - part # 8340 PSL
Rear Right - part # 8340 PSR
2004-2005 PT CRUISER, INCL. TOURING TURBO MODEL (DOES NOT FIT GT TURBO):
Front Left - 8762 PSL
Front Right - 8762 PSR
Rear Left - 8352 PSL
Rear Right - 8352 PSR
2004-2005 PT CRUISER GT TURBO (MUST HAVE "TURBO" STAMPED IN FRONT CALIPER BODY):
Front Left - 8351 PSL
Front Right - 8351 PSR
Rear Left - 8352 PSL
Rear Right - 8352 PSR
Racing Brake Rotors:
Rear Brake Rotor (Drill+Slot) Set (2 rotors) - PT Cruiser (NON-TURBO) REAR 00-05
part # 9072M-141
Front Brake Rotor (Slot) Set (2 rotors) - PT Cruiser (GT) FRONT 03-06
part # 9071-311
Brake Rotor (Slot) Set (2 rotors)- PT Cruiser (GT) REAR 03-06
part #9072-111
Raybestos
Brake Pads, Front:
Quiet Stop Ceramic - part # PGD841QS
PG PLUS Metallic - part # PGD841M
Standard - part # D841
Brake Pads, Rear:
Non-Turbo:
PG Plus Metallic - part # PGD759M
Standard - part # D759
Turbo:
PG Plus Metallic - part # PGD782M
Standard - part # D782
Brake Shoes, Rear:
part # 759
Rotors - Non-Turbo:
Front - part # 76955
Rear - part # 76551
Note: BruteStop rotors available for rears only. Add "BR" suffix and "L" (left) or "R" (right) at end of part #. For example, BR76955L.
Rotors - Turbo:
Front - part # 780136
Rear - part # 780135
Rear Brake Drum:
part # 2907
Consult the Raybestos Catalog for additional parts.
Russell
Stainless Steel Brake Line Kits
Part # 694010 - 2001+ PT Cruiser with ABS 4WD (includes turbo model)
Part # 694020 - 2001+ Chrysler PT Cruiser (with Rear Drum) Brake Line Kit
Part # 639630 - Speed Bleeder, Front. Replacement "one-way" valve built into bleed screw makes bleeding brakes easier.
Part # 639560 - Speed Bleeder, Rear
Part # 639500 - Speed Bleeder Bag (brake fluid catch bag, includes hose)
SP Performance
F/R rotors are available in slotted, crossdrilled & slotted, and Diamond Slotted versions. For the Turbo PT add crossdrilled rotors to the available options. Actual part #'s are unknown at this time.
Stillen Metal Matrix
Front - part # D841M
Rear - part # D512M
Note: double check part #'s.
TRW
Note: TRW offers "Power Stop Extreme Performance Series", "Pro-Series", "Plus Series", and "Valu Maxx" brake pads, as well as
"PowerStop" (available in crossdrilled & slotted or crossdrilled only), "Premium Brake Rotors", and "Valu-MAXX Economy Brake Rotor" for the Front and Rear. However actual part numbers are unknown at this time.
Wagner
Thermo Quiet:
Front - part # MX-841
Rear - part # MX-759
Rear, Turbo - part # MX782
QuickStop:
Front - part # ZX841
Rear - part # ZX759
Rear, turbo - part # ZX782
Rear Drum Brakes:
Thermo Quiet - part # PAB759R
QuickStop - part # Z759R
Rotors:
Front - part # BD125762
Front, turbo - part # BD126035
Rear - part # BD125419
Rear, turbo - not available
Rear Brake Drum - part # BD60783
Consult the Wagner Catalog for additional parts.
|
Stop Tech:
Front only (includes turbo):
part # 83-240-4300 (4 pot calipers)
part # 83-240-2300 (deluxe version with 2 piece rotors)
part # 82-240-2300 (standard version)
|
Wilwood:
Front Only (includes turbo):
part # 140-6376-D
Note: Wilwood used to offer a direct replacement rear rotor that matches the front. Contact Wilwood for further information.
|
Important Information:
The performance rotors shown below are all DRIVER's/LEFT side rotors. As you can see the surface slots rotate forward. Always be sure to install the rotors in this fashion. NEVER INSTALL ROTORS IN THE OPPOSITE DIRECTION OF ROTATION, heat related fatigue and failure will result. Majority of plain and OEM replacement rotors have non-directional cooling vanes and can be used on either side. Directional rotors are usually marked L or R, either stamped on the rotor or with a removable sticker.
|
|
Accessories
Adjustable Rear Cargo Area Tray:
part # 82205707, black w/3 separators
Car Cover:
part # 82205450, Gray, Evolution material, w/pt cruiser logo w/rear license plate window and mirror pockets
Cargo Tote:
part # 82208568, collapsible w/carry handles
Chrome Door Spears (frt and rear):
part # 82207408
Chrome Fuel Filler Door:
part # 82207931
Chrome Upper Moldings:
part # 82207301, "A" Line molding
Convertible Sport Bar Wing Emblem:
part # 5023818AA
Door Edge Guards:
black stainless steel w/vinyl laminate (set of 4)
part # 82205454
Door Handle Paint Protectors (set of 5):
part # 82206326, black
part # CV82206326, chrome
Door Scuff Plates:
part # SF35DX9AB, black OEM, drivers side
part # SF34DX9AB, black OEM, passengers side
part # 82206200, brushed stainless steel w/pt logo (pair)
part # 82207863, w/illuminated pt logo (pair)
Engine Modesty Cover:
part # 4891435-AD
part # 6506452AA, mounting studs (need to purchase 3)
|
Front Air/Bug Deflector:
part # 82208054, translucent smoke
Front End Cover (Bra):
part # 82207291, 2 piece w/pt logo w/license plate opening
part # 82207292, 2 piece w/pt logo w/o license plate opening
part # 82205449, Hood Only w/pt logo
Molded Cargo Tray:
part # 82205459, taupe w/pt logo
part # 82207795, dark slate (grey) w/pt logo
Passenger Cabin Filtration System:
Note: Adding this housing and filter will filter the air before it enters the cabin and help prevent spores and mold from getting into and growing on the A/C condensor unit (the foul A/C smell).
part # 82206886
PT Convertible Windscreen:
part # 82208733, nylon screen attaches to sport bar.
Rear Bumper Step Pad:
part # 82205445, black textured
Rear Cargo Net:
part # 5023356AA
Rear Hatch Shelf Panel:
part # RK001L8AE
Seat Back Organizer/Backpack:
part # 82204544
Splash Guards:
Front: part # 82203875, flat style no logo.
Rear: part # 82205453, flat style black w/silver logo.
Rear: part # 82205781, molded style black w/ pt logo.
Vent Visors (4 side windows):
part # 82205333, tinted w/pentastar, tape-on type
|
|
STAGE 1 TURBO UPGRADE KITS — PT TURBO
The Stage 1 Turbo Kit for the PT Turbo boosts power to 235 hp and
260 ft-lbs. of torque.
Components
• Stage 1 PCM
• (4) 577 cc/min fuel injectors
• Upper-to-lower intake manifold gasket
Calibration Features — PT Manual Transmission (MTX)
• Increased WOT and part throttle boost
• Enhanced 1st gear boost schedule for a higher performance launch
• Optimized calibration for the Mopar Blow-Off Valve Conversion
Kit (P4510548)
• Improved turbo response
• Boost hold feature during WOT shifts
• Soft rev limiter
Calibration Features — PT Automatic Transmission (ATX)
• Increased WOT and part throttle boost
• Optimized calibration for the Mopar Blow-Off Valve Conversion
Kit (P4510548)
• Improved turbo response
• Performance optimized transmission calibration
*P5007943 2003 PT Turbo Stage 1 Upgrade Kit— MTX
*P5007944 2003 PT Turbo Stage 1 Upgrade Kit— ATX
*P4510606 2004 PT Turbo Stage 1 Upgrade Kit— MTX
*P4510597 2004 PT Turbo Stage 1 Upgrade Kit— ATX
*P5007968 2005 PT Turbo Stage 1 Upgrade Kit— MTX
*P5007969 2005 PT Turbo Stage 1 Upgrade Kit— ATX
|
STAGE 2 TURBO UPGRADE KITS — PT TURBO
The Stage 2 Turbo Kits for the PT Turbo give you a power
boost of 265 hp and 280 ft-lbs. of torque on premium pump (100+ octane unleaded racing fuel) gas.
• Stage 2 PCM
• (4) 682 cc/min fuel injectors
• Wastegate actuator
• 3.0 Bar MAP sensor
• 3.0 Bar TIP sensor
*P5007946 2003 PT Turbo Stage 2 Upgrade Kit — MTX
*P5007945 2003 PT Turbo Stage 2 Upgrade Kit — ATX
*P4510257 2004 PT Turbo Stage 2 Upgrade Kit — MTX
*P4510258 2004 PT Turbo Stage 2 Upgrade Kit — ATX
NOTE: Stage 2 production was cancelled due to "lack of demand". The part numbers above are for reference only.
BLOW-OFF VALVE CONVERSION KIT
The Mopar Performance Blow Off Valve Conversion Kit, compatible with Stage 1 and 2, maximizes
the function of your vehicle’s turbo system by venting excess, hot
compressed air into the atmosphere, thereby reducing your intake
air temperature. This kit adds a vent to the stock blow off valve
and creates a unique turbo sound for your PT Turbo.
*P4510548 Blow-Off Valve Conversion Kit — anodized, blue
Ceramic-Coated Intake Manifold
Kick up the underhood appearance of your PT Cruiser
with these ceramic-coated intake manifolds. They’ll make your vehicle
stand out when you raise the hood at the next car show.
P4510553 2001–04 PT Turbo Intake Manifold
|
*NOTE: *Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use.
|
| |
<;/Div>